Assembly supplied: long block. Review the exact included components, engine configuration and installation requirements below.
Core exchange: Review the source core-return requirements below and contact Craik Custom to confirm the applicable refundable core deposit before ordering.
Industrial Injection 1998.5-2002 Cummins Performance Long Block (PDM-24VSTLB)
Description
Industrial Injection Performance Long Block for 1998.5-2002 Dodge Ram 2500/3500 5.9L 24V Cummins. A fully assembled, sim-tested long block built on a balanced and blue-printed rotating assembly with Stage 1 performance camshaft, performance-ported and fire-ringed cylinder head, and ARP 2000 head studs.
The short block runs balanced Cummins crank, shot-peened and balanced 24V rods with ARP rod bolts, coated and chamfered pistons, and the 12mm Gorilla Girdle with ARP main studs. Stage 1 performance camshaft, coated H-series main and rod bearings, billet freeze plugs, Premium Killer Dowel Pin kit, new oil pump, water pump, oil cooler, oil pickup tube, and a Big Iron stamped oil pan.
The head is performance ported with diamond-honed valve guides, new stainless steel valves, radius-cut fire ring head gasket on a milled/fire-ringed deck, ARP 2000 head studs, 95lb performance valve springs, and drilled/tapped coolant freeze plugs.
For a short block only (no head) use the PDM-24VSTSB Performance Short Block. For the same internals as an unassembled DIY kit, see the PDM-24VSTBB Performance Builder Box.
Features
- Sim-Tested Performance Long Block — Fully Assembled
- Balanced & Blue-Printed Rotating Assembly
- Balanced Cummins Crank
- Shot-Peened & Balanced 24V Rods with ARP Rod Bolts
- Coated & Chamfered Pistons
- 12mm Gorilla Girdle with ARP Main Studs
- Stage 1 Performance Camshaft
- Coated H-Series Main & Rod Bearings
- Billet Freeze Plugs + Premium Killer Dowel Pin Kit
- New Oil Pump, Water Pump, Oil Cooler, Oil Pickup Tube
- Big Iron Oil Pan
- Performance Ported Cylinder Head
- New Diamond-Honed Valve Guides + New Stainless Steel Valves
- Radius-Cut Fire Ring Head Gasket on Milled/Fire-Ringed Deck
- ARP 2000 Head Studs + 95lb Performance Valve Springs
- Part Number: PDM-24VSTLB
Notes
- Required: Joe Gibbs Break-In Oil (not included) for the first 300-500 miles after startup. All Industrial Injection short blocks and long blocks must be broken in on Joe Gibbs.
- Does not include valve cover, rockers, pushrods, or additional assembly gaskets.
- Core deposit applies — includes the engine block, crankshaft, connecting rods, camshaft, and cylinder head. Return the cores to recover the deposit.
Dropshipping & availability: This third-party product is usually dropshipped directly from the manufacturer or distributor. “In stock” means available to order, not necessarily held at Craik Custom. Supplier availability, processing times and delivery estimates may vary. Contact carter@craikcustom.ca for current lead times.

