Hamilton Cams 1989-2018 Cummins 188/220 Hot Street/Strip Camshaft (Steel) (07-c-188/220S)
Description
This Cam increases midrange power great for moderate competition from idle to 4,500RPM. This Hamilton Cam is a great companion with a 66mm or smaller turbo for low RPM power or with large singles at higher RPM in 24V applications.
Note: The 1989-1998 Cummins 5.9L 12V will require no more than .025" piston protrusion and at least .055" valve face depth with a standard head gasket. In 1998.5-2002 5.9L Cummins applications, you will require no more than .025" piston protrusion and a minimum of .038" valve face depth with a standard gasket. The 2003-2018 5.9L/6.7L Cummins engines will require .018" piston protrusion and a minimum of .038" valve face depth with a standard gasket. You can still run an oversize head gasket or cut valve reliefs if you do not meet the requirements for the piston to valve clearance.
Part Number: 07-c-188/220S
Features
- The largest drop in cam
- A great option for moderate competition
- You can still run an oversize head gasket or cut valve reliefs if you do not meet the requirements for the piston to valve clearance.
Notes
- Recommended upgrading pushrods to prevent loss in valve lift or retarded timing.
- Recommended to upgrade valve springs to prevent valve float and improve performance.
- Required to run steel tappets and machine the engine block for cam bushings
- Must verify clearances even though this camshaft is considered a drop-in replacement.
Dropshipping & availability: This third-party product is usually dropshipped directly from the manufacturer or distributor. “In stock” means available to order, not necessarily held at Craik Custom. Supplier availability, processing times and delivery estimates may vary. Contact carter@craikcustom.ca for current lead times.

