Hamilton Cams 1989-2018 Cummins 188/220 Hot Street/Strip Camshaft (07-c-188/220)
Description
This Hamilton Cam has outperformed all other cams that Hamilton has tested it against to date, from idle to 4,200 RPM. This Cam is the largest drop-in cam that Hamilton offers.
For "drop-in" on a 12V, it is required no more than .018" piston protrusion and at least .055" valve face depth with a standard head gasket and a 99 intake centerline. On a 24V you will require no more than .018" piston protrusion and at least .038" valve face depth with a standard gasket. You can still run an oversize head gasket or cut valve reliefs if you do not meet the requirements for the piston to valve clearance.
Part Number: 07-c-188/220
Features
- The largest drop in cam
- Outperformed all other cams tested
- You can still run an oversize head gasket or cut valve reliefs if you do not meet the requirements for the piston to valve clearance.
Notes
- Use 62mm or larger single turbos or larger twins. Install intake on a 99 centerline, performance springs and pushrods are recommended. If your head or block has been surfaced, you will need to verify piston to valve clearance.
Dropshipping & availability: This third-party product is usually dropshipped directly from the manufacturer or distributor. “In stock” means available to order, not necessarily held at Craik Custom. Supplier availability, processing times and delivery estimates may vary. Contact carter@craikcustom.ca for current lead times.

